1952 Austin A 70 vs. 1955 Austin A 55
To start off, 1955 Austin A 55 is newer by 3 year(s). Which means there will be less support and parts availability for 1952 Austin A 70. In addition, the cost of maintenance, including insurance, on 1952 Austin A 70 would be higher. At 2,200 cc (4 cylinders), 1952 Austin A 70 is equipped with a bigger engine. In terms of performance, 1952 Austin A 70 (63 HP @ 3800 RPM) has 12 more horse power than 1955 Austin A 55. (51 HP @ 4250 RPM). In normal driving conditions, 1952 Austin A 70 should accelerate faster than 1955 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin A 70 weights approximately 215 kg more than 1955 Austin A 55. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1952 Austin A 70 | 1955 Austin A 55 | |
Make | Austin | Austin |
Model | A 70 | A 55 |
Year Released | 1952 | 1955 |
Engine Position | Front | Front |
Engine Size | 2200 cc | 1489 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 63 HP | 51 HP |
Engine RPM | 3800 RPM | 4250 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1270 kg | 1055 kg |
Vehicle Length | 4150 mm | 4250 mm |
Vehicle Width | 1690 mm | 1570 mm |
Vehicle Height | 1900 mm | 1570 mm |
Wheelbase Size | 2440 mm | 2530 mm |