1952 Austin A 70 vs. 1975 Fiat 500

To start off, 1975 Fiat 500 is newer by 23 year(s). Which means there will be less support and parts availability for 1952 Austin A 70. In addition, the cost of maintenance, including insurance, on 1952 Austin A 70 would be higher. At 2,200 cc (4 cylinders), 1952 Austin A 70 is equipped with a bigger engine. In terms of performance, 1952 Austin A 70 (63 HP @ 3800 RPM) has 45 more horse power than 1975 Fiat 500. (18 HP @ 4600 RPM). In normal driving conditions, 1952 Austin A 70 should accelerate faster than 1975 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin A 70 weights approximately 760 kg more than 1975 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1952 Austin A 70 1975 Fiat 500
Make Austin Fiat
Model A 70 500
Year Released 1952 1975
Engine Position Front Rear
Engine Size 2200 cc 498 cc
Engine Cylinders 4 cylinders 2 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 63 HP 18 HP
Engine RPM 3800 RPM 4600 RPM
Engine Bore Size 79.4 mm 67.4 mm
Engine Stroke Size 111.1 mm 70 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1270 kg 510 kg
Vehicle Length 4150 mm 2980 mm
Vehicle Width 1690 mm 1330 mm
Vehicle Height 1900 mm 1330 mm
Wheelbase Size 2440 mm 1850 mm
Fuel Tank Capacity 63 L 22 L