1952 Austin A vs. 2008 Peugeot 406
To start off, 2008 Peugeot 406 is newer by 56 year(s). Which means there will be less support and parts availability for 1952 Austin A. In addition, the cost of maintenance, including insurance, on 1952 Austin A would be higher. At 3,992 cc (6 cylinders), 1952 Austin A is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin A weights approximately 550 kg more than 2008 Peugeot 406.
Because 1952 Austin A is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 Austin A. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 406, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Austin A (288 Nm @ 2200 RPM) has 98 more torque (in Nm) than 2008 Peugeot 406. (190 Nm @ 4100 RPM). This means 1952 Austin A will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 406.
Compare all specifications:
| 1952 Austin A | 2008 Peugeot 406 | |
| Make | Austin | Peugeot |
| Model | A | 406 |
| Year Released | 1952 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 3992 cc | 1997 cc |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 124 HP | 0 HP |
| Torque | 288 Nm | 190 Nm |
| Torque RPM | 2200 RPM | 4100 RPM |
| Engine Bore Size | 87.3 mm | 85 mm |
| Engine Stroke Size | 111.1 mm | 88 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1975 kg | 1425 kg |
| Vehicle Length | 4880 mm | 3740 mm |
| Vehicle Height | 1710 mm | 1630 mm |
| Wheelbase Size | 3040 mm | 2710 mm |
| Fuel Tank Capacity | 34 L | 70 L |
