1952 Austin-Healey 100 vs. 1988 Morgan 4

To start off, 1988 Morgan 4 is newer by 36 year(s). Which means there will be less support and parts availability for 1952 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1952 Austin-Healey 100 would be higher. At 2,660 cc (4 cylinders), 1952 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 1988 Morgan 4 (123 HP @ 6000 RPM) has 34 more horse power than 1952 Austin-Healey 100. (89 HP @ 4000 RPM) In normal driving conditions, 1988 Morgan 4 should accelerate faster than 1952 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin-Healey 100 weights approximately 75 kg more than 1988 Morgan 4.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Morgan 4 (162 Nm @ 4500 RPM) has 18 more torque (in Nm) than 1952 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 1988 Morgan 4 will have an easier job in driving up hills or pulling heavy equipment than 1952 Austin-Healey 100.

Compare all specifications:

1952 Austin-Healey 100 1988 Morgan 4
Make Austin-Healey Morgan
Model 100 4
Year Released 1952 1988
Engine Position Front Front
Engine Size 2660 cc 1796 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 89 HP 123 HP
Engine RPM 4000 RPM 6000 RPM
Torque 144 Nm 162 Nm
Torque RPM 2500 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 945 kg 870 kg
Vehicle Length 3860 mm 3670 mm
Vehicle Width 1540 mm 1430 mm
Vehicle Height 1250 mm 1300 mm
Wheelbase Size 2290 mm 2450 mm