1952 Austin-Healey Tickford vs. 1996 Steyr G-series
To start off, 1996 Steyr G-series is newer by 44 year(s). Which means there will be less support and parts availability for 1952 Austin-Healey Tickford. In addition, the cost of maintenance, including insurance, on 1952 Austin-Healey Tickford would be higher. At 2,994 cc (6 cylinders), 1996 Steyr G-series is equipped with a bigger engine. In terms of performance, 1996 Steyr G-series (175 HP @ 4400 RPM) has 70 more horse power than 1952 Austin-Healey Tickford. (105 HP @ 4800 RPM) In normal driving conditions, 1996 Steyr G-series should accelerate faster than 1952 Austin-Healey Tickford. With that said, vehicle weight also plays an important factor in acceleration. 1996 Steyr G-series weights approximately 560 kg more than 1952 Austin-Healey Tickford. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1996 Steyr G-series (330 Nm @ 1600 RPM) has 146 more torque (in Nm) than 1952 Austin-Healey Tickford. (184 Nm @ 3000 RPM). This means 1996 Steyr G-series will have an easier job in driving up hills or pulling heavy equipment than 1952 Austin-Healey Tickford.
Compare all specifications:
| 1952 Austin-Healey Tickford | 1996 Steyr G-series | |
| Make | Austin-Healey | Steyr |
| Model | Tickford | G-series |
| Year Released | 1952 | 1996 |
| Engine Size | 2441 cc | 2994 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 105 HP | 175 HP |
| Engine RPM | 4800 RPM | 4400 RPM |
| Torque | 184 Nm | 330 Nm |
| Torque RPM | 3000 RPM | 1600 RPM |
| Fuel Type | Gasoline | Diesel |
| Vehicle Weight | 1530 kg | 2090 kg |
| Vehicle Length | 4500 mm | 4240 mm |
| Vehicle Width | 1710 mm | 1770 mm |
| Vehicle Height | 1400 mm | 1940 mm |
| Wheelbase Size | 2600 mm | 2410 mm |
