1952 BMW 501 vs. 2007 Fiat Palio II
To start off, 2007 Fiat Palio II is newer by 55 year(s). Which means there will be less support and parts availability for 1952 BMW 501. In addition, the cost of maintenance, including insurance, on 1952 BMW 501 would be higher. At 1,971 cc (6 cylinders), 1952 BMW 501 is equipped with a bigger engine. In terms of performance, both vehicles can yield 72 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1952 BMW 501 weights approximately 289 kg more than 2007 Fiat Palio II.
Because 1952 BMW 501 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 BMW 501. However, in wet, icy, snow, or gravel driving conditions, 2007 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1952 BMW 501 | 2007 Fiat Palio II | |
Make | BMW | Fiat |
Model | 501 | Palio II |
Year Released | 1952 | 2007 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 72 HP | 72 HP |
Engine RPM | 4400 RPM | 6000 RPM |
Engine Bore Size | 66 mm | 70.8 mm |
Engine Stroke Size | 96 mm | 78.9 mm |
Engine Compression Ratio | 6.8:1 | 9.1:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1285 kg | 996 kg |
Vehicle Length | 4810 mm | 3830 mm |
Vehicle Width | 1810 mm | 1640 mm |
Vehicle Height | 1560 mm | 1440 mm |
Wheelbase Size | 2840 mm | 2380 mm |