1952 Ferrari 225 vs. 1984 Volkswagen Polo
To start off, 1984 Volkswagen Polo is newer by 32 year(s). Which means there will be less support and parts availability for 1952 Ferrari 225. In addition, the cost of maintenance, including insurance, on 1952 Ferrari 225 would be higher. At 2,713 cc (12 cylinders), 1952 Ferrari 225 is equipped with a bigger engine. In terms of performance, 1952 Ferrari 225 (210 HP) has 171 more horse power than 1984 Volkswagen Polo. (39 HP). In normal driving conditions, 1952 Ferrari 225 should accelerate faster than 1984 Volkswagen Polo. With that said, vehicle weight also plays an important factor in acceleration. 1952 Ferrari 225 weights approximately 150 kg more than 1984 Volkswagen Polo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1952 Ferrari 225 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 Ferrari 225. However, in wet, icy, snow, or gravel driving conditions, 1984 Volkswagen Polo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1952 Ferrari 225 | 1984 Volkswagen Polo | |
Make | Ferrari | Volkswagen |
Model | 225 | Polo |
Year Released | 1952 | 1984 |
Engine Position | Front | Front |
Engine Size | 2713 cc | 1042 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 210 HP | 39 HP |
Engine Bore Size | 70 mm | 75 mm |
Engine Stroke Size | 58.8 mm | 59 mm |
Engine Compression Ratio | 8.5:1 | 9.5:1 |
Top Speed | 230 km/hour | 135 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 850 kg | 700 kg |
Wheelbase Size | 2260 mm | 2410 mm |