1952 Ford Consul vs. 2006 Lancia Phedra

To start off, 2006 Lancia Phedra is newer by 54 year(s). Which means there will be less support and parts availability for 1952 Ford Consul. In addition, the cost of maintenance, including insurance, on 1952 Ford Consul would be higher. At 2,944 cc (6 cylinders), 2006 Lancia Phedra is equipped with a bigger engine. In terms of performance, 2006 Lancia Phedra (201 HP) has 161 more horse power than 1952 Ford Consul. (40 HP) In normal driving conditions, 2006 Lancia Phedra should accelerate faster than 1952 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 2006 Lancia Phedra weights approximately 739 kg more than 1952 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1952 Ford Consul is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 Ford Consul. However, in wet, icy, snow, or gravel driving conditions, 2006 Lancia Phedra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Lancia Phedra (285 Nm @ 3750 RPM) has 185 more torque (in Nm) than 1952 Ford Consul. (100 Nm @ 2400 RPM). This means 2006 Lancia Phedra will have an easier job in driving up hills or pulling heavy equipment than 1952 Ford Consul. 2006 Lancia Phedra has automatic transmission and 1952 Ford Consul has manual transmission. 1952 Ford Consul will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Lancia Phedra will be easier to drive especially in heavy traffic.

Compare all specifications:

1952 Ford Consul 2006 Lancia Phedra
Make Ford Lancia
Model Consul Phedra
Year Released 1952 2006
Engine Position Front Front
Engine Size 1508 cc 2944 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 40 HP 201 HP
Torque 100 Nm 285 Nm
Torque RPM 2400 RPM 3750 RPM
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Vehicle Weight 1045 kg 1784 kg
Vehicle Length 4280 mm 4760 mm
Vehicle Width 1630 mm 1870 mm
Vehicle Height 1550 mm 1760 mm
Wheelbase Size 2550 mm 2830 mm