1952 Holden FX vs. 1966 Renault Floride
To start off, 1966 Renault Floride is newer by 14 year(s). Which means there will be less support and parts availability for 1952 Holden FX. In addition, the cost of maintenance, including insurance, on 1952 Holden FX would be higher. At 2,166 cc (6 cylinders), 1952 Holden FX is equipped with a bigger engine. In terms of performance, both vehicles can yield 51 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1952 Holden FX weights approximately 145 kg more than 1966 Renault Floride.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Holden FX (136 Nm @ 2000 RPM) has 60 more torque (in Nm) than 1966 Renault Floride. (76 Nm @ 3300 RPM). This means 1952 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1966 Renault Floride.
Compare all specifications:
| 1952 Holden FX | 1966 Renault Floride | |
| Make | Holden | Renault |
| Model | FX | Floride |
| Year Released | 1952 | 1966 |
| Engine Position | Front | Rear |
| Engine Size | 2166 cc | 1106 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 51 HP | 51 HP |
| Torque | 136 Nm | 76 Nm |
| Torque RPM | 2000 RPM | 3300 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 970 kg | 825 kg |
| Vehicle Length | 4380 mm | 4270 mm |
| Vehicle Width | 1710 mm | 1580 mm |
| Vehicle Height | 1580 mm | 1320 mm |
| Wheelbase Size | 2620 mm | 2270 mm |
