1952 Holden FX vs. 1973 Mercedes-Benz 220
To start off, 1973 Mercedes-Benz 220 is newer by 21 year(s). Which means there will be less support and parts availability for 1952 Holden FX. In addition, the cost of maintenance, including insurance, on 1952 Holden FX would be higher. At 2,197 cc (4 cylinders), 1973 Mercedes-Benz 220 is equipped with a bigger engine. In terms of performance, 1973 Mercedes-Benz 220 (58 HP) has 7 more horse power than 1952 Holden FX. (51 HP) In normal driving conditions, 1973 Mercedes-Benz 220 should accelerate faster than 1952 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1973 Mercedes-Benz 220 weights approximately 422 kg more than 1952 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Holden FX (136 Nm @ 2000 RPM) has 10 more torque (in Nm) than 1973 Mercedes-Benz 220. (126 Nm @ 2400 RPM). This means 1952 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1973 Mercedes-Benz 220. 1973 Mercedes-Benz 220 has automatic transmission and 1952 Holden FX has manual transmission. 1952 Holden FX will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Mercedes-Benz 220 will be easier to drive especially in heavy traffic.
Compare all specifications:
1952 Holden FX | 1973 Mercedes-Benz 220 | |
Make | Holden | Mercedes-Benz |
Model | FX | 220 |
Year Released | 1952 | 1973 |
Engine Position | Front | Front |
Engine Size | 2166 cc | 2197 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 58 HP |
Torque | 136 Nm | 126 Nm |
Torque RPM | 2000 RPM | 2400 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 970 kg | 1392 kg |
Vehicle Length | 4380 mm | 4690 mm |
Vehicle Width | 1710 mm | 1780 mm |
Vehicle Height | 1580 mm | 1450 mm |
Wheelbase Size | 2620 mm | 2760 mm |