1952 MG YB vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 58 year(s). Which means there will be less support and parts availability for 1952 MG YB. In addition, the cost of maintenance, including insurance, on 1952 MG YB would be higher. At 1,250 cc (4 cylinders), 1952 MG YB is equipped with a bigger engine. In terms of performance, 2010 Fiat Panda (59 HP @ 5000 RPM) has 14 more horse power than 1952 MG YB. (45 HP @ 4800 RPM) In normal driving conditions, 2010 Fiat Panda should accelerate faster than 1952 MG YB. With that said, vehicle weight also plays an important factor in acceleration. 1952 MG YB weights approximately 95 kg more than 2010 Fiat Panda.
Because 2010 Fiat Panda is four wheel drive (4WD), it will have significant more traction and grip than 1952 MG YB. In wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Panda (102 Nm @ 2500 RPM) has 23 more torque (in Nm) than 1952 MG YB. (79 Nm @ 2400 RPM). This means 2010 Fiat Panda will have an easier job in driving up hills or pulling heavy equipment than 1952 MG YB.
Compare all specifications:
| 1952 MG YB | 2010 Fiat Panda | |
| Make | MG | Fiat |
| Model | YB | Panda |
| Year Released | 1952 | 2010 |
| Engine Size | 1250 cc | 1242 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 45 HP | 59 HP |
| Engine RPM | 4800 RPM | 5000 RPM |
| Torque | 79 Nm | 102 Nm |
| Torque RPM | 2400 RPM | 2500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Vehicle Weight | 1060 kg | 965 kg |
| Vehicle Length | 4170 mm | 3580 mm |
| Vehicle Width | 1510 mm | 1610 mm |
| Vehicle Height | 1450 mm | 1640 mm |
| Wheelbase Size | 2520 mm | 2310 mm |
