1953 Allard K3 vs. 2000 Toyota GT1

To start off, 2000 Toyota GT1 is newer by 47 year(s). Which means there will be less support and parts availability for 1953 Allard K3. In addition, the cost of maintenance, including insurance, on 1953 Allard K3 would be higher. At 3,622 cc (8 cylinders), 1953 Allard K3 is equipped with a bigger engine. In terms of performance, 1953 Allard K3 (94 HP @ 3800 RPM) has 9 more horse power than 2000 Toyota GT1. (85 HP @ 5500 RPM). In normal driving conditions, 1953 Allard K3 should accelerate faster than 2000 Toyota GT1. With that said, vehicle weight also plays an important factor in acceleration. 1953 Allard K3 weights approximately 282 kg more than 2000 Toyota GT1. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Allard K3 (217 Nm @ 1800 RPM) has 92 more torque (in Nm) than 2000 Toyota GT1. (125 Nm @ 4000 RPM). This means 1953 Allard K3 will have an easier job in driving up hills or pulling heavy equipment than 2000 Toyota GT1.

Compare all specifications:

1953 Allard K3 2000 Toyota GT1
Make Allard Toyota
Model K3 GT1
Year Released 1953 2000
Engine Position Front Middle
Engine Size 3622 cc 1599 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 94 HP 85 HP
Engine RPM 3800 RPM 5500 RPM
Torque 217 Nm 125 Nm
Torque RPM 1800 RPM 4000 RPM
Engine Bore Size 77.8 mm 93.7 mm
Engine Stroke Size 95.3 mm 72.4 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1182 kg 900 kg
Vehicle Length 4500 mm 4850 mm
Vehicle Width 1680 mm 2010 mm
Vehicle Height 1380 mm 1130 mm
Wheelbase Size 2550 mm 2810 mm