1953 Alvis TC vs. 2010 SsangYong Stavic

To start off, 2010 SsangYong Stavic is newer by 57 year(s). Which means there will be less support and parts availability for 1953 Alvis TC. In addition, the cost of maintenance, including insurance, on 1953 Alvis TC would be higher. At 3,199 cc (6 cylinders), 2010 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2010 SsangYong Stavic (217 HP @ 6100 RPM) has 117 more horse power than 1953 Alvis TC. (100 HP @ 4000 RPM) In normal driving conditions, 2010 SsangYong Stavic should accelerate faster than 1953 Alvis TC. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Stavic weights approximately 599 kg more than 1953 Alvis TC. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 SsangYong Stavic is four wheel drive (4WD), it will have significant more traction and grip than 1953 Alvis TC. In wet, icy, snow, or gravel driving conditions, 2010 SsangYong Stavic will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Stavic (312 Nm @ 4600 RPM) has 91 more torque (in Nm) than 1953 Alvis TC. (221 Nm @ 2000 RPM). This means 2010 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1953 Alvis TC. 2010 SsangYong Stavic has automatic transmission and 1953 Alvis TC has manual transmission. 1953 Alvis TC will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Stavic will be easier to drive especially in heavy traffic.

Compare all specifications:

1953 Alvis TC 2010 SsangYong Stavic
Make Alvis SsangYong
Model TC Stavic
Year Released 1953 2010
Engine Position Front Front
Engine Size 2993 cc 3199 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 100 HP 217 HP
Engine RPM 4000 RPM 6100 RPM
Torque 221 Nm 312 Nm
Torque RPM 2000 RPM 4600 RPM
Engine Compression Ratio 8.0:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1435 kg 2034 kg
Vehicle Length 4630 mm 5130 mm
Vehicle Width 1680 mm 1830 mm
Vehicle Height 1580 mm 1920 mm
Wheelbase Size 2840 mm 3010 mm
Fuel Tank Capacity 64 L 80 L