1953 Armstrong Siddeley Sapphire vs. 2010 Jeep Commander
To start off, 2010 Jeep Commander is newer by 57 year(s). Which means there will be less support and parts availability for 1953 Armstrong Siddeley Sapphire. In addition, the cost of maintenance, including insurance, on 1953 Armstrong Siddeley Sapphire would be higher. At 5,654 cc (8 cylinders), 2010 Jeep Commander is equipped with a bigger engine. In terms of performance, 2010 Jeep Commander (347 HP @ 5000 RPM) has 222 more horse power than 1953 Armstrong Siddeley Sapphire. (125 HP @ 4400 RPM) In normal driving conditions, 2010 Jeep Commander should accelerate faster than 1953 Armstrong Siddeley Sapphire. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Commander weights approximately 780 kg more than 1953 Armstrong Siddeley Sapphire. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Jeep Commander is four wheel drive (4WD), it will have significant more traction and grip than 1953 Armstrong Siddeley Sapphire. In wet, icy, snow, or gravel driving conditions, 2010 Jeep Commander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Jeep Commander (520 Nm @ 4000 RPM) has 281 more torque (in Nm) than 1953 Armstrong Siddeley Sapphire. (239 Nm @ 1000 RPM). This means 2010 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1953 Armstrong Siddeley Sapphire. 2010 Jeep Commander has automatic transmission and 1953 Armstrong Siddeley Sapphire has manual transmission. 1953 Armstrong Siddeley Sapphire will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Jeep Commander will be easier to drive especially in heavy traffic.
Compare all specifications:
1953 Armstrong Siddeley Sapphire | 2010 Jeep Commander | |
Make | Armstrong Siddeley | Jeep |
Model | Sapphire | Commander |
Year Released | 1953 | 2010 |
Body Type | Sedan | SUV |
Engine Position | Front | Front |
Engine Size | 3435 cc | 5654 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 125 HP | 347 HP |
Engine RPM | 4400 RPM | 5000 RPM |
Torque | 239 Nm | 520 Nm |
Torque RPM | 1000 RPM | 4000 RPM |
Engine Compression Ratio | 7.0:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Top Speed | 141 km/hour | 208 km/hour |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1575 kg | 2355 kg |
Vehicle Length | 4910 mm | 4790 mm |
Vehicle Width | 1840 mm | 1910 mm |
Vehicle Height | 1610 mm | 1830 mm |
Wheelbase Size | 2900 mm | 2790 mm |
Fuel Tank Capacity | 72 L | 80 L |