1953 Aston Martin DB2 vs. 1980 Chrysler Avenger

To start off, 1980 Chrysler Avenger is newer by 27 year(s). Which means there will be less support and parts availability for 1953 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1953 Aston Martin DB2 would be higher. At 2,580 cc (6 cylinders), 1953 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 1953 Aston Martin DB2 (108 HP @ 5000 RPM) has 49 more horse power than 1980 Chrysler Avenger. (59 HP @ 5000 RPM). In normal driving conditions, 1953 Aston Martin DB2 should accelerate faster than 1980 Chrysler Avenger. With that said, vehicle weight also plays an important factor in acceleration. 1953 Aston Martin DB2 weights approximately 275 kg more than 1980 Chrysler Avenger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Aston Martin DB2 (187 Nm @ 3000 RPM) has 94 more torque (in Nm) than 1980 Chrysler Avenger. (93 Nm @ 2600 RPM). This means 1953 Aston Martin DB2 will have an easier job in driving up hills or pulling heavy equipment than 1980 Chrysler Avenger. 1980 Chrysler Avenger has automatic transmission and 1953 Aston Martin DB2 has manual transmission. 1953 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Chrysler Avenger will be easier to drive especially in heavy traffic.

Compare all specifications:

1953 Aston Martin DB2 1980 Chrysler Avenger
Make Aston Martin Chrysler
Model DB2 Avenger
Year Released 1953 1980
Engine Position Front Front
Engine Size 2580 cc 1295 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 108 HP 59 HP
Engine RPM 5000 RPM 5000 RPM
Torque 187 Nm 93 Nm
Torque RPM 3000 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Vehicle Weight 1155 kg 880 kg
Vehicle Length 4310 mm 4150 mm
Vehicle Width 1640 mm 1620 mm
Vehicle Height 1370 mm 1420 mm
Wheelbase Size 2520 mm 2500 mm