1953 Aston Martin DB3 vs. 1972 Chrysler Sedan

To start off, 1972 Chrysler Sedan is newer by 19 year(s). Which means there will be less support and parts availability for 1953 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1953 Aston Martin DB3 would be higher. At 4,342 cc (6 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (200 HP @ 4800 RPM) has 47 more horse power than 1953 Aston Martin DB3. (153 HP @ 5500 RPM) In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 1953 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 580 kg more than 1953 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (355 Nm @ 2000 RPM) has 160 more torque (in Nm) than 1953 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1953 Aston Martin DB3. 1972 Chrysler Sedan has automatic transmission and 1953 Aston Martin DB3 has manual transmission. 1953 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1953 Aston Martin DB3 1972 Chrysler Sedan
Make Aston Martin Chrysler
Model DB3 Sedan
Year Released 1953 1972
Engine Position Front Front
Engine Size 2922 cc 4342 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 153 HP 200 HP
Engine RPM 5500 RPM 4800 RPM
Torque 195 Nm 355 Nm
Torque RPM 3000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Doors 2 doors 4 doors
Vehicle Weight 940 kg 1520 kg
Vehicle Length 3920 mm 5010 mm
Vehicle Width 1510 mm 1890 mm
Vehicle Height 1050 mm 1440 mm
Wheelbase Size 2220 mm 2930 mm