1953 Austin A 110 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 55 year(s). Which means there will be less support and parts availability for 1953 Austin A 110. In addition, the cost of maintenance, including insurance, on 1953 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1953 Austin A 110 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1953 Austin A 110 weights approximately 621 kg more than 2008 Mazda 6.

Because 1953 Austin A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Austin A 110. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Austin A 110 (287 Nm) has 80 more torque (in Nm) than 2008 Mazda 6. (207 Nm). This means 1953 Austin A 110 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6.

Compare all specifications:

1953 Austin A 110 2008 Mazda 6
Make Austin Mazda
Model A 110 6
Year Released 1953 2008
Engine Position Front Front
Engine Size 3992 cc 2261 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 124 HP 0 HP
Torque 287 Nm 207 Nm
Engine Bore Size 87.3 mm 87.6 mm
Engine Stroke Size 111.1 mm 94 mm
Engine Compression Ratio 6.8:1 10.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1975 kg 1354 kg
Vehicle Length 4880 mm 4500 mm
Vehicle Height 1710 mm 1760 mm
Wheelbase Size 3040 mm 2680 mm
Fuel Tank Capacity 34 L 64 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]