1953 Austin A 135 vs. 1975 Sunbeam Rapier

To start off, 1975 Sunbeam Rapier is newer by 22 year(s). Which means there will be less support and parts availability for 1953 Austin A 135. In addition, the cost of maintenance, including insurance, on 1953 Austin A 135 would be higher. At 3,993 cc (6 cylinders), 1953 Austin A 135 is equipped with a bigger engine. In terms of performance, 1953 Austin A 135 (118 HP @ 4000 RPM) has 39 more horse power than 1975 Sunbeam Rapier. (79 HP @ 5200 RPM). In normal driving conditions, 1953 Austin A 135 should accelerate faster than 1975 Sunbeam Rapier. With that said, vehicle weight also plays an important factor in acceleration. 1953 Austin A 135 weights approximately 1150 kg more than 1975 Sunbeam Rapier. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Austin A 135 (251 Nm @ 2000 RPM) has 125 more torque (in Nm) than 1975 Sunbeam Rapier. (126 Nm @ 3800 RPM). This means 1953 Austin A 135 will have an easier job in driving up hills or pulling heavy equipment than 1975 Sunbeam Rapier.

Compare all specifications:

1953 Austin A 135 1975 Sunbeam Rapier
Make Austin Sunbeam
Model A 135 Rapier
Year Released 1953 1975
Engine Position Front Front
Engine Size 3993 cc 1725 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 118 HP 79 HP
Engine RPM 4000 RPM 5200 RPM
Torque 251 Nm 126 Nm
Torque RPM 2000 RPM 3800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 2180 kg 1030 kg
Vehicle Length 5470 mm 4440 mm
Vehicle Width 1900 mm 1670 mm
Vehicle Height 1780 mm 1390 mm
Wheelbase Size 3360 mm 2510 mm