1953 Austin A 40 vs. 1948 Oldsmobile 66
To start off, 1953 Austin A 40 is newer by 5 year(s). Which means there will be less support and parts availability for 1948 Oldsmobile 66. In addition, the cost of maintenance, including insurance, on 1948 Oldsmobile 66 would be higher. At 3,902 cc (6 cylinders), 1948 Oldsmobile 66 is equipped with a bigger engine. In terms of performance, 1948 Oldsmobile 66 (100 HP @ 3400 RPM) has 51 more horse power than 1953 Austin A 40. (49 HP @ 5000 RPM) In normal driving conditions, 1948 Oldsmobile 66 should accelerate faster than 1953 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 1948 Oldsmobile 66 weights approximately 780 kg more than 1953 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1953 Austin A 40 | 1948 Oldsmobile 66 | |
| Make | Austin | Oldsmobile |
| Model | A 40 | 66 |
| Year Released | 1953 | 1948 |
| Body Type | Convertible | Station Wagon |
| Engine Position | Front | Front |
| Engine Size | 1200 cc | 3902 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 49 HP | 100 HP |
| Engine RPM | 5000 RPM | 3400 RPM |
| Engine Bore Size | 65.5 mm | 88.9 mm |
| Engine Stroke Size | 89 mm | 104.8 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 990 kg | 1770 kg |
| Vehicle Length | 4050 mm | 5190 mm |
| Vehicle Width | 1560 mm | 1920 mm |
| Wheelbase Size | 2360 mm | 3030 mm |
