1953 Austin A 40 vs. 1995 Rover 400
To start off, 1995 Rover 400 is newer by 42 year(s). Which means there will be less support and parts availability for 1953 Austin A 40. In addition, the cost of maintenance, including insurance, on 1953 Austin A 40 would be higher. At 1,589 cc (4 cylinders), 1995 Rover 400 is equipped with a bigger engine. In terms of performance, 1995 Rover 400 (109 HP @ 6000 RPM) has 60 more horse power than 1953 Austin A 40. (49 HP @ 5000 RPM) In normal driving conditions, 1995 Rover 400 should accelerate faster than 1953 Austin A 40.
Because 1953 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 1995 Rover 400, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Rover 400 (145 Nm @ 3000 RPM) has 62 more torque (in Nm) than 1953 Austin A 40. (83 Nm @ 3000 RPM). This means 1995 Rover 400 will have an easier job in driving up hills or pulling heavy equipment than 1953 Austin A 40.
Compare all specifications:
1953 Austin A 40 | 1995 Rover 400 | |
Make | Austin | Rover |
Model | A 40 | 400 |
Year Released | 1953 | 1995 |
Engine Position | Front | Front |
Engine Size | 1200 cc | 1589 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 49 HP | 109 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 83 Nm | 145 Nm |
Torque RPM | 3000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 4 seats | 5 seats |
Vehicle Length | 4050 mm | 4370 mm |
Vehicle Width | 1560 mm | 1690 mm |
Vehicle Height | 1450 mm | 1410 mm |
Wheelbase Size | 2360 mm | 2560 mm |