1953 Austin A 40 vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 55 year(s). Which means there will be less support and parts availability for 1953 Austin A 40. In addition, the cost of maintenance, including insurance, on 1953 Austin A 40 would be higher. At 1,297 cc (4 cylinders), 2008 Ford Bantam is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1953 Austin A 40 weights approximately 72 kg more than 2008 Ford Bantam.
Because 1953 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Bantam (110 Nm @ 3000 RPM) has 26 more torque (in Nm) than 1953 Austin A 40. (84 Nm @ 2200 RPM). This means 2008 Ford Bantam will have an easier job in driving up hills or pulling heavy equipment than 1953 Austin A 40.
Compare all specifications:
1953 Austin A 40 | 2008 Ford Bantam | |
Make | Austin | Ford |
Model | A 40 | Bantam |
Year Released | 1953 | 2008 |
Engine Position | Front | Front |
Engine Size | 1200 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 41 HP | 0 HP |
Torque | 84 Nm | 110 Nm |
Torque RPM | 2200 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1032 kg | 960 kg |
Vehicle Length | 4060 mm | 4280 mm |
Vehicle Width | 1610 mm | 1470 mm |
Vehicle Height | 1630 mm | 1640 mm |
Wheelbase Size | 2360 mm | 2670 mm |
Fuel Tank Capacity | 34 L | 54 L |