1953 Austin A 70 vs. 1966 Fiat Dino
To start off, 1966 Fiat Dino is newer by 13 year(s). Which means there will be less support and parts availability for 1953 Austin A 70. In addition, the cost of maintenance, including insurance, on 1953 Austin A 70 would be higher. At 2,417 cc (6 cylinders), 1966 Fiat Dino is equipped with a bigger engine. In terms of performance, 1966 Fiat Dino (177 HP @ 6600 RPM) has 114 more horse power than 1953 Austin A 70. (63 HP @ 3800 RPM) In normal driving conditions, 1966 Fiat Dino should accelerate faster than 1953 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 1966 Fiat Dino weights approximately 130 kg more than 1953 Austin A 70. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1953 Austin A 70 | 1966 Fiat Dino | |
Make | Austin | Fiat |
Model | A 70 | Dino |
Year Released | 1953 | 1966 |
Engine Position | Front | Front |
Engine Size | 2200 cc | 2417 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 63 HP | 177 HP |
Engine RPM | 3800 RPM | 6600 RPM |
Engine Bore Size | 79.4 mm | 92.5 mm |
Engine Stroke Size | 111.1 mm | 60 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1270 kg | 1400 kg |
Vehicle Length | 4150 mm | 4520 mm |
Vehicle Width | 1690 mm | 1710 mm |
Vehicle Height | 1900 mm | 1330 mm |
Wheelbase Size | 2440 mm | 2560 mm |