1953 Austin A 70 vs. 1978 Toyota Crown
To start off, 1978 Toyota Crown is newer by 25 year(s). Which means there will be less support and parts availability for 1953 Austin A 70. In addition, the cost of maintenance, including insurance, on 1953 Austin A 70 would be higher. At 2,200 cc (4 cylinders), 1953 Austin A 70 is equipped with a bigger engine. In terms of performance, 1978 Toyota Crown (102 HP @ 5600 RPM) has 39 more horse power than 1953 Austin A 70. (63 HP @ 3800 RPM) In normal driving conditions, 1978 Toyota Crown should accelerate faster than 1953 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 1978 Toyota Crown weights approximately 80 kg more than 1953 Austin A 70. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1953 Austin A 70 | 1978 Toyota Crown | |
Make | Austin | Toyota |
Model | A 70 | Crown |
Year Released | 1953 | 1978 |
Engine Position | Front | Front |
Engine Size | 2200 cc | 1988 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 63 HP | 102 HP |
Engine RPM | 3800 RPM | 5600 RPM |
Engine Bore Size | 79.4 mm | 75 mm |
Engine Stroke Size | 111.1 mm | 75 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1270 kg | 1350 kg |
Vehicle Length | 4150 mm | 4690 mm |
Vehicle Width | 1690 mm | 1700 mm |
Vehicle Height | 1900 mm | 1440 mm |
Wheelbase Size | 2440 mm | 2700 mm |
Fuel Tank Capacity | 63 L | 60 L |