1953 Austin A 70 vs. 2010 Land Rover Defender

To start off, 2010 Land Rover Defender is newer by 57 year(s). Which means there will be less support and parts availability for 1953 Austin A 70. In addition, the cost of maintenance, including insurance, on 1953 Austin A 70 would be higher. At 2,402 cc (4 cylinders), 2010 Land Rover Defender is equipped with a bigger engine. In terms of performance, 2010 Land Rover Defender (120 HP @ 3500 RPM) has 57 more horse power than 1953 Austin A 70. (63 HP @ 3800 RPM) In normal driving conditions, 2010 Land Rover Defender should accelerate faster than 1953 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 2010 Land Rover Defender weights approximately 1438 kg more than 1953 Austin A 70. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Land Rover Defender is four wheel drive (4WD), it will have significant more traction and grip than 1953 Austin A 70. In wet, icy, snow, or gravel driving conditions, 2010 Land Rover Defender will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1953 Austin A 70 2010 Land Rover Defender
Make Austin Land Rover
Model A 70 Defender
Year Released 1953 2010
Engine Position Front Front
Engine Size 2200 cc 2402 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 63 HP 120 HP
Engine RPM 3800 RPM 3500 RPM
Engine Bore Size 79.4 mm 90 mm
Engine Stroke Size 111.1 mm 94.6 mm
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1270 kg 2708 kg
Vehicle Length 4150 mm 4380 mm
Vehicle Width 1690 mm 2000 mm
Vehicle Height 1900 mm 2030 mm
Wheelbase Size 2440 mm 2800 mm
Fuel Tank Capacity 63 L 75 L