1953 Austin-Healey 100 vs. 1949 Simca Type 11 Monoplace
To start off, 1953 Austin-Healey 100 is newer by 4 year(s). Which means there will be less support and parts availability for 1949 Simca Type 11 Monoplace. In addition, the cost of maintenance, including insurance, on 1949 Simca Type 11 Monoplace would be higher. At 2,660 cc (4 cylinders), 1953 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 1953 Austin-Healey 100 (89 HP @ 4000 RPM) has 17 more horse power than 1949 Simca Type 11 Monoplace. (72 HP @ 5800 RPM). In normal driving conditions, 1953 Austin-Healey 100 should accelerate faster than 1949 Simca Type 11 Monoplace. With that said, vehicle weight also plays an important factor in acceleration. 1953 Austin-Healey 100 weights approximately 528 kg more than 1949 Simca Type 11 Monoplace. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1953 Austin-Healey 100 | 1949 Simca Type 11 Monoplace | |
Make | Austin-Healey | Simca |
Model | 100 | Type 11 Monoplace |
Year Released | 1953 | 1949 |
Engine Size | 2660 cc | 1220 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 89 HP | 72 HP |
Engine RPM | 4000 RPM | 5800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 948 kg | 420 kg |
Vehicle Length | 3860 mm | 3130 mm |
Vehicle Width | 1540 mm | 1350 mm |
Wheelbase Size | 2290 mm | 2250 mm |