1953 Austin-Healey 100 vs. 2013 Toyota Sienna
To start off, 2013 Toyota Sienna is newer by 60 year(s). Which means there will be less support and parts availability for 1953 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1953 Austin-Healey 100 would be higher. At 3,500 cc (6 cylinders), 2013 Toyota Sienna is equipped with a bigger engine. In terms of performance, 2013 Toyota Sienna (262 HP @ 6200 RPM) has 173 more horse power than 1953 Austin-Healey 100. (89 HP @ 4000 RPM) In normal driving conditions, 2013 Toyota Sienna should accelerate faster than 1953 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Sienna weights approximately 1167 kg more than 1953 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Austin-Healey 100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Austin-Healey 100. However, in wet, icy, snow, or gravel driving conditions, 2013 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Sienna (332 Nm @ 4700 RPM) has 188 more torque (in Nm) than 1953 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 2013 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1953 Austin-Healey 100. 2013 Toyota Sienna has automatic transmission and 1953 Austin-Healey 100 has manual transmission. 1953 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Sienna will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1953 Austin-Healey 100 | 2013 Toyota Sienna | |
| Make | Austin-Healey | Toyota |
| Model | 100 | Sienna |
| Year Released | 1953 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 2660 cc | 3500 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 89 HP | 262 HP |
| Engine RPM | 4000 RPM | 6200 RPM |
| Torque | 144 Nm | 332 Nm |
| Torque RPM | 2500 RPM | 4700 RPM |
| Engine Bore Size | 87.3 mm | 94 mm |
| Engine Stroke Size | 111.1 mm | 83 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 2 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 948 kg | 2115 kg |
| Vehicle Length | 3860 mm | 5085 mm |
| Vehicle Width | 1540 mm | 1985 mm |
| Vehicle Height | 1250 mm | 1811 mm |
| Wheelbase Size | 2290 mm | 3030 mm |
| Fuel Tank Capacity | 54 L | 79 L |
