1953 Bristol 403 vs. 2013 Hyundai Santa Fe
To start off, 2013 Hyundai Santa Fe is newer by 60 year(s). Which means there will be less support and parts availability for 1953 Bristol 403. In addition, the cost of maintenance, including insurance, on 1953 Bristol 403 would be higher. At 2,359 cc (4 cylinders), 2013 Hyundai Santa Fe is equipped with a bigger engine. In terms of performance, 2013 Hyundai Santa Fe (187 HP @ 6300 RPM) has 101 more horse power than 1953 Bristol 403. (86 HP @ 5000 RPM) In normal driving conditions, 2013 Hyundai Santa Fe should accelerate faster than 1953 Bristol 403. With that said, vehicle weight also plays an important factor in acceleration. 2013 Hyundai Santa Fe weights approximately 415 kg more than 1953 Bristol 403. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Bristol 403 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Bristol 403. However, in wet, icy, snow, or gravel driving conditions, 2013 Hyundai Santa Fe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Hyundai Santa Fe (245 Nm @ 4250 RPM) has 99 more torque (in Nm) than 1953 Bristol 403. (146 Nm @ 3500 RPM). This means 2013 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 1953 Bristol 403. 2013 Hyundai Santa Fe has automatic transmission and 1953 Bristol 403 has manual transmission. 1953 Bristol 403 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Hyundai Santa Fe will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1953 Bristol 403 | 2013 Hyundai Santa Fe | |
| Make | Bristol | Hyundai |
| Model | 403 | Santa Fe |
| Year Released | 1953 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 1969 cc | 2359 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 86 HP | 187 HP |
| Engine RPM | 5000 RPM | 6300 RPM |
| Torque | 146 Nm | 245 Nm |
| Torque RPM | 3500 RPM | 4250 RPM |
| Engine Bore Size | 66 mm | 88 mm |
| Engine Stroke Size | 96 mm | 97 mm |
| Engine Compression Ratio | 8.5:1 | 11.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1225 kg | 1640 kg |
| Vehicle Length | 4870 mm | 4690 mm |
| Vehicle Width | 1710 mm | 1880 mm |
| Vehicle Height | 1530 mm | 1690 mm |
| Wheelbase Size | 2900 mm | 2700 mm |
| Fuel Tank Capacity | 77 L | 66 L |
