1953 Bristol 404 vs. 1993 Cadillac Seville
To start off, 1993 Cadillac Seville is newer by 40 year(s). Which means there will be less support and parts availability for 1953 Bristol 404. In addition, the cost of maintenance, including insurance, on 1953 Bristol 404 would be higher. At 4,915 cc (8 cylinders), 1993 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1993 Cadillac Seville (197 HP @ 4100 RPM) has 106 more horse power than 1953 Bristol 404. (91 HP @ 5000 RPM) In normal driving conditions, 1993 Cadillac Seville should accelerate faster than 1953 Bristol 404. With that said, vehicle weight also plays an important factor in acceleration. 1993 Cadillac Seville weights approximately 550 kg more than 1953 Bristol 404. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Bristol 404 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Bristol 404. However, in wet, icy, snow, or gravel driving conditions, 1993 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Cadillac Seville (372 Nm @ 3000 RPM) has 220 more torque (in Nm) than 1953 Bristol 404. (152 Nm @ 3750 RPM). This means 1993 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1953 Bristol 404. 1993 Cadillac Seville has automatic transmission and 1953 Bristol 404 has manual transmission. 1953 Bristol 404 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1953 Bristol 404 | 1993 Cadillac Seville | |
Make | Bristol | Cadillac |
Model | 404 | Seville |
Year Released | 1953 | 1993 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 4915 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 91 HP | 197 HP |
Engine RPM | 5000 RPM | 4100 RPM |
Torque | 152 Nm | 372 Nm |
Torque RPM | 3750 RPM | 3000 RPM |
Engine Bore Size | 66 mm | 92 mm |
Engine Stroke Size | 96 mm | 92 mm |
Engine Compression Ratio | 8.5:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1040 kg | 1590 kg |
Vehicle Length | 4000 mm | 5190 mm |
Vehicle Width | 1730 mm | 1900 mm |
Vehicle Height | 1420 mm | 1380 mm |
Wheelbase Size | 2450 mm | 2830 mm |
Fuel Tank Capacity | 72 L | 100 L |