1953 Buick 40 vs. 1970 Toyota Crown

To start off, 1970 Toyota Crown is newer by 17 year(s). Which means there will be less support and parts availability for 1953 Buick 40. In addition, the cost of maintenance, including insurance, on 1953 Buick 40 would be higher. At 4,315 cc (8 cylinders), 1953 Buick 40 is equipped with a bigger engine. In terms of performance, 1953 Buick 40 (123 HP @ 3800 RPM) has 15 more horse power than 1970 Toyota Crown. (108 HP @ 5400 RPM). In normal driving conditions, 1953 Buick 40 should accelerate faster than 1970 Toyota Crown. With that said, vehicle weight also plays an important factor in acceleration. 1953 Buick 40 weights approximately 410 kg more than 1970 Toyota Crown. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Buick 40 (304 Nm @ 2200 RPM) has 147 more torque (in Nm) than 1970 Toyota Crown. (157 Nm @ 3600 RPM). This means 1953 Buick 40 will have an easier job in driving up hills or pulling heavy equipment than 1970 Toyota Crown.

Compare all specifications:

1953 Buick 40 1970 Toyota Crown
Make Buick Toyota
Model 40 Crown
Year Released 1953 1970
Engine Position Front Front
Engine Size 4315 cc 1988 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 123 HP 108 HP
Engine RPM 3800 RPM 5400 RPM
Torque 304 Nm 157 Nm
Torque RPM 2200 RPM 3600 RPM
Engine Bore Size 80.9 mm 75 mm
Engine Stroke Size 104.8 mm 75 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1665 kg 1255 kg
Vehicle Width 1950 mm 1700 mm
Wheelbase Size 3090 mm 2700 mm