1953 Holden FX vs. 1949 Jaguar Mark IV

To start off, 1953 Holden FX is newer by 4 year(s). Which means there will be less support and parts availability for 1949 Jaguar Mark IV. In addition, the cost of maintenance, including insurance, on 1949 Jaguar Mark IV would be higher. At 3,483 cc (6 cylinders), 1949 Jaguar Mark IV is equipped with a bigger engine. In terms of performance, 1949 Jaguar Mark IV (123 HP) has 72 more horse power than 1953 Holden FX. (51 HP) In normal driving conditions, 1949 Jaguar Mark IV should accelerate faster than 1953 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1949 Jaguar Mark IV weights approximately 820 kg more than 1953 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1949 Jaguar Mark IV (250 Nm @ 2000 RPM) has 114 more torque (in Nm) than 1953 Holden FX. (136 Nm @ 2000 RPM). This means 1949 Jaguar Mark IV will have an easier job in driving up hills or pulling heavy equipment than 1953 Holden FX.

Compare all specifications:

1953 Holden FX 1949 Jaguar Mark IV
Make Holden Jaguar
Model FX Mark IV
Year Released 1953 1949
Engine Position Front Front
Engine Size 2166 cc 3483 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 123 HP
Torque 136 Nm 250 Nm
Torque RPM 2000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 970 kg 1790 kg
Vehicle Length 4380 mm 4730 mm
Vehicle Width 1710 mm 1680 mm
Wheelbase Size 2620 mm 3060 mm