1953 Holden FX vs. 2010 BMW 116
To start off, 2010 BMW 116 is newer by 57 year(s). Which means there will be less support and parts availability for 1953 Holden FX. In addition, the cost of maintenance, including insurance, on 1953 Holden FX would be higher. At 2,166 cc (6 cylinders), 1953 Holden FX is equipped with a bigger engine. In terms of performance, 2010 BMW 116 (116 HP) has 65 more horse power than 1953 Holden FX. (51 HP) In normal driving conditions, 2010 BMW 116 should accelerate faster than 1953 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 116 weights approximately 400 kg more than 1953 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 116 (260 Nm @ 1750 RPM) has 124 more torque (in Nm) than 1953 Holden FX. (136 Nm @ 2000 RPM). This means 2010 BMW 116 will have an easier job in driving up hills or pulling heavy equipment than 1953 Holden FX.
Compare all specifications:
1953 Holden FX | 2010 BMW 116 | |
Make | Holden | BMW |
Model | FX | 116 |
Year Released | 1953 | 2010 |
Engine Position | Front | Front |
Engine Size | 2166 cc | 1995 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 51 HP | 116 HP |
Torque | 136 Nm | 260 Nm |
Torque RPM | 2000 RPM | 1750 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Vehicle Weight | 970 kg | 1370 kg |
Vehicle Length | 4380 mm | 4239 mm |
Vehicle Width | 1710 mm | 1748 mm |
Vehicle Height | 1580 mm | 1421 mm |
Wheelbase Size | 2620 mm | 2660 mm |