1953 Hudson Super Wasp vs. 2007 Lancia Thesis

To start off, 2007 Lancia Thesis is newer by 54 year(s). Which means there will be less support and parts availability for 1953 Hudson Super Wasp. In addition, the cost of maintenance, including insurance, on 1953 Hudson Super Wasp would be higher. At 4,293 cc (6 cylinders), 1953 Hudson Super Wasp is equipped with a bigger engine. In terms of performance, 2007 Lancia Thesis (182 HP @ 5500 RPM) has 42 more horse power than 1953 Hudson Super Wasp. (140 HP @ 4000 RPM) In normal driving conditions, 2007 Lancia Thesis should accelerate faster than 1953 Hudson Super Wasp. With that said, vehicle weight also plays an important factor in acceleration. 2007 Lancia Thesis weights approximately 96 kg more than 1953 Hudson Super Wasp. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1953 Hudson Super Wasp is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Hudson Super Wasp. However, in wet, icy, snow, or gravel driving conditions, 2007 Lancia Thesis, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Hudson Super Wasp (349 Nm @ 1800 RPM) has 41 more torque (in Nm) than 2007 Lancia Thesis. (308 Nm @ 2200 RPM). This means 1953 Hudson Super Wasp will have an easier job in driving up hills or pulling heavy equipment than 2007 Lancia Thesis.

Compare all specifications:

1953 Hudson Super Wasp 2007 Lancia Thesis
Make Hudson Lancia
Model Super Wasp Thesis
Year Released 1953 2007
Engine Position Front Front
Engine Size 4293 cc 1996 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 140 HP 182 HP
Engine RPM 4000 RPM 5500 RPM
Torque 349 Nm 308 Nm
Torque RPM 1800 RPM 2200 RPM
Engine Bore Size 90.5 mm 82 mm
Engine Stroke Size 111.1 mm 75.7 mm
Engine Compression Ratio 7.0:1 8.5:1
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1599 kg 1695 kg
Vehicle Length 5160 mm 4890 mm
Vehicle Width 1980 mm 1840 mm
Vehicle Height 1530 mm 1470 mm
Wheelbase Size 3030 mm 2810 mm
Fuel Tank Capacity 75 L 75 L