1954 Aston Martin DB2 vs. 2010 Mitsubishi Outlander
To start off, 2010 Mitsubishi Outlander is newer by 56 year(s). Which means there will be less support and parts availability for 1954 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1954 Aston Martin DB2 would be higher. At 3,000 cc (6 cylinders), 2010 Mitsubishi Outlander is equipped with a bigger engine. In terms of performance, 2010 Mitsubishi Outlander (230 HP @ 6250 RPM) has 122 more horse power than 1954 Aston Martin DB2. (108 HP @ 5000 RPM) In normal driving conditions, 2010 Mitsubishi Outlander should accelerate faster than 1954 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mitsubishi Outlander weights approximately 487 kg more than 1954 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1954 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2010 Mitsubishi Outlander, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mitsubishi Outlander (291 Nm @ 3750 RPM) has 104 more torque (in Nm) than 1954 Aston Martin DB2. (187 Nm @ 3000 RPM). This means 2010 Mitsubishi Outlander will have an easier job in driving up hills or pulling heavy equipment than 1954 Aston Martin DB2. 2010 Mitsubishi Outlander has automatic transmission and 1954 Aston Martin DB2 has manual transmission. 1954 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mitsubishi Outlander will be easier to drive especially in heavy traffic.
Compare all specifications:
1954 Aston Martin DB2 | 2010 Mitsubishi Outlander | |
Make | Aston Martin | Mitsubishi |
Model | DB2 | Outlander |
Year Released | 1954 | 2010 |
Body Type | Coupe | SUV |
Engine Position | Front | Front |
Engine Size | 2580 cc | 3000 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 108 HP | 230 HP |
Engine RPM | 5000 RPM | 6250 RPM |
Torque | 187 Nm | 291 Nm |
Torque RPM | 3000 RPM | 3750 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1158 kg | 1645 kg |
Vehicle Length | 4310 mm | 4666 mm |
Vehicle Width | 1640 mm | 1801 mm |
Vehicle Height | 1370 mm | 1720 mm |
Wheelbase Size | 2520 mm | 2670 mm |
Fuel Tank Capacity | 77 L | 63 L |