1954 Austin A vs. 2010 Ford Ranger

To start off, 2010 Ford Ranger is newer by 56 year(s). Which means there will be less support and parts availability for 1954 Austin A. In addition, the cost of maintenance, including insurance, on 1954 Austin A would be higher. At 4,000 cc (6 cylinders), 2010 Ford Ranger is equipped with a bigger engine. In terms of performance, 2010 Ford Ranger (207 HP @ 5250 RPM) has 77 more horse power than 1954 Austin A. (130 HP @ 3800 RPM) In normal driving conditions, 2010 Ford Ranger should accelerate faster than 1954 Austin A. With that said, vehicle weight also plays an important factor in acceleration. 1954 Austin A weights approximately 311 kg more than 2010 Ford Ranger.

Because 2010 Ford Ranger is four wheel drive (4WD), it will have significant more traction and grip than 1954 Austin A. In wet, icy, snow, or gravel driving conditions, 2010 Ford Ranger will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Ranger (322 Nm @ 3000 RPM) has 35 more torque (in Nm) than 1954 Austin A. (287 Nm @ 2200 RPM). This means 2010 Ford Ranger will have an easier job in driving up hills or pulling heavy equipment than 1954 Austin A.

Compare all specifications:

1954 Austin A 2010 Ford Ranger
Make Austin Ford
Model A Ranger
Year Released 1954 2010
Engine Position Front Front
Engine Size 3992 cc 4000 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 130 HP 207 HP
Engine RPM 3800 RPM 5250 RPM
Torque 287 Nm 322 Nm
Torque RPM 2200 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Number of Doors 4 doors 2 doors
Vehicle Weight 1975 kg 1664 kg
Vehicle Length 4880 mm 5171 mm
Vehicle Width 1860 mm 1811 mm
Vehicle Height 1680 mm 1720 mm
Wheelbase Size 3040 mm 3198 mm
Fuel Tank Capacity 34 L 74 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]