1954 Austin-Healey 100 vs. 2002 Chrysler Sebring
To start off, 2002 Chrysler Sebring is newer by 48 year(s). Which means there will be less support and parts availability for 1954 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1954 Austin-Healey 100 would be higher. At 2,660 cc (4 cylinders), 1954 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 2002 Chrysler Sebring (149 HP @ 5200 RPM) has 59 more horse power than 1954 Austin-Healey 100. (90 HP @ 4000 RPM) In normal driving conditions, 2002 Chrysler Sebring should accelerate faster than 1954 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Sebring weights approximately 507 kg more than 1954 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1954 Austin-Healey 100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 Austin-Healey 100. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Sebring (226 Nm @ 4000 RPM) has 82 more torque (in Nm) than 1954 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 2002 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1954 Austin-Healey 100. 2002 Chrysler Sebring has automatic transmission and 1954 Austin-Healey 100 has manual transmission. 1954 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1954 Austin-Healey 100 | 2002 Chrysler Sebring | |
| Make | Austin-Healey | Chrysler |
| Model | 100 | Sebring |
| Year Released | 1954 | 2002 |
| Engine Position | Front | Front |
| Engine Size | 2660 cc | 2343 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 90 HP | 149 HP |
| Engine RPM | 4000 RPM | 5200 RPM |
| Torque | 144 Nm | 226 Nm |
| Torque RPM | 2500 RPM | 4000 RPM |
| Engine Bore Size | 87.3 mm | 87.4 mm |
| Engine Stroke Size | 111.1 mm | 101 mm |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 945 kg | 1452 kg |
| Vehicle Length | 3860 mm | 4850 mm |
| Vehicle Width | 1540 mm | 1800 mm |
| Vehicle Height | 1250 mm | 1400 mm |
| Wheelbase Size | 2290 mm | 2880 mm |
