1954 Austin-Healey 100 vs. 2010 Chevrolet Silverado
To start off, 2010 Chevrolet Silverado is newer by 56 year(s). Which means there will be less support and parts availability for 1954 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1954 Austin-Healey 100 would be higher. At 5,999 cc (8 cylinders), 2010 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Silverado (360 HP @ 5400 RPM) has 270 more horse power than 1954 Austin-Healey 100. (90 HP @ 4000 RPM) In normal driving conditions, 2010 Chevrolet Silverado should accelerate faster than 1954 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Silverado weights approximately 604 kg more than 1954 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Silverado (515 Nm @ 4200 RPM) has 371 more torque (in Nm) than 1954 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 2010 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 1954 Austin-Healey 100. 2010 Chevrolet Silverado has automatic transmission and 1954 Austin-Healey 100 has manual transmission. 1954 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Silverado will be easier to drive especially in heavy traffic.
Compare all specifications:
1954 Austin-Healey 100 | 2010 Chevrolet Silverado | |
Make | Austin-Healey | Chevrolet |
Model | 100 | Silverado |
Year Released | 1954 | 2010 |
Engine Position | Front | Front |
Engine Size | 2660 cc | 5999 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 90 HP | 360 HP |
Engine RPM | 4000 RPM | 5400 RPM |
Torque | 144 Nm | 515 Nm |
Torque RPM | 2500 RPM | 4200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 945 kg | 1549 kg |
Vehicle Length | 3860 mm | 5860 mm |
Vehicle Width | 1540 mm | 2040 mm |
Vehicle Height | 1250 mm | 1960 mm |
Wheelbase Size | 2290 mm | 3650 mm |