1954 Austin-Healey 100 vs. 2012 Mercedes-Benz ML

To start off, 2012 Mercedes-Benz ML is newer by 58 year(s). Which means there will be less support and parts availability for 1954 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1954 Austin-Healey 100 would be higher. At 4,600 cc (8 cylinders), 2012 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz ML (399 HP @ 5000 RPM) has 309 more horse power than 1954 Austin-Healey 100. (90 HP @ 4000 RPM) In normal driving conditions, 2012 Mercedes-Benz ML should accelerate faster than 1954 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz ML weights approximately 1316 kg more than 1954 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 Mercedes-Benz ML is all wheel drive (AWD), it will have significant more traction and grip than 1954 Austin-Healey 100. In wet, icy, snow, or gravel driving conditions, 2012 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz ML (600 Nm @ 1600 RPM) has 456 more torque (in Nm) than 1954 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 2012 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1954 Austin-Healey 100. 2012 Mercedes-Benz ML has automatic transmission and 1954 Austin-Healey 100 has manual transmission. 1954 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz ML will be easier to drive especially in heavy traffic.

Compare all specifications:

1954 Austin-Healey 100 2012 Mercedes-Benz ML
Make Austin-Healey Mercedes-Benz
Model 100 ML
Year Released 1954 2012
Engine Position Front Front
Engine Size 2660 cc 4600 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 90 HP 399 HP
Engine RPM 4000 RPM 5000 RPM
Torque 144 Nm 600 Nm
Torque RPM 2500 RPM 1600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear AWD
Transmission Type Manual 7-speed shiftable automatic
Number of Seats 2 seats 5 seats
Vehicle Weight 945 kg 2261 kg
Vehicle Length 3860 mm 4803 mm
Vehicle Width 1540 mm 2141 mm
Vehicle Height 1250 mm 1796 mm
Wheelbase Size 2290 mm 2916 mm