1954 Bristol 405 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 54 year(s). Which means there will be less support and parts availability for 1954 Bristol 405. In addition, the cost of maintenance, including insurance, on 1954 Bristol 405 would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 73 more horse power than 1954 Bristol 405. (100 HP @ 5000 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1954 Bristol 405. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 575 kg more than 1954 Bristol 405. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1954 Bristol 405 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 Bristol 405. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (226 Nm @ 4400 RPM) has 74 more torque (in Nm) than 1954 Bristol 405. (152 Nm @ 3750 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1954 Bristol 405. 2008 Chrysler Sebring has automatic transmission and 1954 Bristol 405 has manual transmission. 1954 Bristol 405 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1954 Bristol 405 | 2008 Chrysler Sebring | |
Make | Bristol | Chrysler |
Model | 405 | Sebring |
Year Released | 1954 | 2008 |
Engine Position | Front | Front |
Engine Size | 1970 cc | 2360 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 100 HP | 173 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 152 Nm | 226 Nm |
Torque RPM | 3750 RPM | 4400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1240 kg | 1815 kg |
Vehicle Length | 4820 mm | 4930 mm |
Vehicle Width | 1730 mm | 1820 mm |
Vehicle Height | 1470 mm | 1490 mm |
Wheelbase Size | 2900 mm | 2770 mm |
Fuel Tank Capacity | 72 L | 64 L |