1954 GAZ M-20 vs. 1999 Nissan Almera

To start off, 1999 Nissan Almera is newer by 45 year(s). Which means there will be less support and parts availability for 1954 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1954 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1954 GAZ M-20 is equipped with a bigger engine. In terms of performance, 1999 Nissan Almera (86 HP @ 6000 RPM) has 35 more horse power than 1954 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 1999 Nissan Almera should accelerate faster than 1954 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1954 GAZ M-20 weights approximately 415 kg more than 1999 Nissan Almera.

Because 1954 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 1999 Nissan Almera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1954 GAZ M-20 (125 Nm @ 2200 RPM) has 9 more torque (in Nm) than 1999 Nissan Almera. (116 Nm @ 4000 RPM). This means 1954 GAZ M-20 will have an easier job in driving up hills or pulling heavy equipment than 1999 Nissan Almera.

Compare all specifications:

1954 GAZ M-20 1999 Nissan Almera
Make GAZ Nissan
Model M-20 Almera
Year Released 1954 1999
Engine Size 2120 cc 1392 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 51 HP 86 HP
Engine RPM 3600 RPM 6000 RPM
Torque 125 Nm 116 Nm
Torque RPM 2200 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1460 kg 1045 kg
Vehicle Length 4670 mm 4130 mm
Vehicle Width 1900 mm 1700 mm
Vehicle Height 1650 mm 1400 mm
Wheelbase Size 2710 mm 2540 mm