1954 GAZ M-20 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 54 year(s). Which means there will be less support and parts availability for 1954 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1954 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1954 GAZ M-20 is equipped with a bigger engine. In terms of performance, 2008 Mazda 3 (148 HP @ 6500 RPM) has 97 more horse power than 1954 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 2008 Mazda 3 should accelerate faster than 1954 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1954 GAZ M-20 weights approximately 229 kg more than 2008 Mazda 3.

Because 1954 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (182 Nm @ 4500 RPM) has 57 more torque (in Nm) than 1954 GAZ M-20. (125 Nm @ 2200 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1954 GAZ M-20.

Compare all specifications:

1954 GAZ M-20 2008 Mazda 3
Make GAZ Mazda
Model M-20 3
Year Released 1954 2008
Engine Size 2120 cc 1996 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 51 HP 148 HP
Engine RPM 3600 RPM 6500 RPM
Torque 125 Nm 182 Nm
Torque RPM 2200 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1460 kg 1231 kg
Vehicle Length 4670 mm 4550 mm
Vehicle Width 1900 mm 1760 mm
Vehicle Height 1650 mm 1470 mm
Wheelbase Size 2710 mm 2650 mm