1955 Abarth 208 vs. 1967 Fiat 125

To start off, 1967 Fiat 125 is newer by 12 year(s). Which means there will be less support and parts availability for 1955 Abarth 208. In addition, the cost of maintenance, including insurance, on 1955 Abarth 208 would be higher. At 1,606 cc (4 cylinders), 1967 Fiat 125 is equipped with a bigger engine. In terms of performance, 1967 Fiat 125 (90 HP @ 5600 RPM) has 25 more horse power than 1955 Abarth 208. (65 HP @ 6000 RPM) In normal driving conditions, 1967 Fiat 125 should accelerate faster than 1955 Abarth 208. With that said, vehicle weight also plays an important factor in acceleration. 1967 Fiat 125 weights approximately 90 kg more than 1955 Abarth 208. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1955 Abarth 208 1967 Fiat 125
Make Abarth Fiat
Model 208 125
Year Released 1955 1967
Engine Position Front Front
Engine Size 1088 cc 1606 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 65 HP 90 HP
Engine RPM 6000 RPM 5600 RPM
Engine Bore Size 68 mm 80 mm
Engine Stroke Size 74.9 mm 80 mm
Engine Compression Ratio 9.0:1 8.8:1
Top Speed 165 km/hour 161 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 870 kg 960 kg
Vehicle Length 3630 mm 4230 mm
Vehicle Width 1570 mm 1610 mm
Vehicle Height 950 mm 1450 mm
Wheelbase Size 2060 mm 2430 mm
Fuel Tank Capacity 27 L 45 L