1955 Abarth 208 vs. 2010 Mazda 2

To start off, 2010 Mazda 2 is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Abarth 208. In addition, the cost of maintenance, including insurance, on 1955 Abarth 208 would be higher. At 1,498 cc (4 cylinders), 2010 Mazda 2 is equipped with a bigger engine. In terms of performance, 2010 Mazda 2 (102 HP @ 6000 RPM) has 37 more horse power than 1955 Abarth 208. (65 HP @ 6000 RPM) In normal driving conditions, 2010 Mazda 2 should accelerate faster than 1955 Abarth 208. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 2 weights approximately 90 kg more than 1955 Abarth 208. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1955 Abarth 208 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Abarth 208. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 2, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1955 Abarth 208 2010 Mazda 2
Make Abarth Mazda
Model 208 2
Year Released 1955 2010
Engine Position Front Front
Engine Size 1088 cc 1498 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 65 HP 102 HP
Engine RPM 6000 RPM 6000 RPM
Engine Bore Size 68 mm 78 mm
Engine Stroke Size 74.9 mm 78.4 mm
Engine Compression Ratio 9.0:1 10.0:1
Top Speed 165 km/hour 188 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 870 kg 960 kg
Vehicle Length 3630 mm 3890 mm
Vehicle Width 1570 mm 1700 mm
Vehicle Height 950 mm 1480 mm
Wheelbase Size 2060 mm 2500 mm
Fuel Tank Capacity 27 L 43 L