1955 Alpine A 106 vs. 2010 Mercedes-Benz ML

To start off, 2010 Mercedes-Benz ML is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Alpine A 106. In addition, the cost of maintenance, including insurance, on 1955 Alpine A 106 would be higher. At 3,500 cc (6 cylinders), 2010 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz ML (268 HP @ 6000 RPM) has 248 more horse power than 1955 Alpine A 106. (20 HP @ 4000 RPM) In normal driving conditions, 2010 Mercedes-Benz ML should accelerate faster than 1955 Alpine A 106. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz ML weights approximately 1604 kg more than 1955 Alpine A 106. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Mercedes-Benz ML is all wheel drive (AWD), it will have significant more traction and grip than 1955 Alpine A 106. In wet, icy, snow, or gravel driving conditions, 2010 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz ML (349 Nm @ 2400 RPM) has 304 more torque (in Nm) than 1955 Alpine A 106. (45 Nm @ 2000 RPM). This means 2010 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1955 Alpine A 106. 2010 Mercedes-Benz ML has automatic transmission and 1955 Alpine A 106 has manual transmission. 1955 Alpine A 106 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz ML will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Alpine A 106 2010 Mercedes-Benz ML
Make Alpine Mercedes-Benz
Model A 106 ML
Year Released 1955 2010
Body Type Coupe SUV
Engine Position Rear Front
Engine Size 747 cc 3500 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 20 HP 268 HP
Engine RPM 4000 RPM 6000 RPM
Torque 45 Nm 349 Nm
Torque RPM 2000 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear AWD
Transmission Type Manual Automatic
Number of Doors 2 doors 5 doors
Vehicle Weight 530 kg 2134 kg
Vehicle Length 3700 mm 4780 mm
Vehicle Width 1450 mm 1910 mm
Vehicle Height 1280 mm 1816 mm
Wheelbase Size 2110 mm 2913 mm
Fuel Tank Capacity 28 L 95 L