1955 Alvis TC 21 vs. 2000 Beijing BJ 2020
To start off, 2000 Beijing BJ 2020 is newer by 45 year(s). Which means there will be less support and parts availability for 1955 Alvis TC 21. In addition, the cost of maintenance, including insurance, on 1955 Alvis TC 21 would be higher. At 2,993 cc (6 cylinders), 1955 Alvis TC 21 is equipped with a bigger engine. In terms of performance, both vehicles can yield 105 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2000 Beijing BJ 2020 weights approximately 130 kg more than 1955 Alvis TC 21.
Because 2000 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1955 Alvis TC 21. In wet, icy, snow, or gravel driving conditions, 2000 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Alvis TC 21 (221 Nm @ 2500 RPM) has 40 more torque (in Nm) than 2000 Beijing BJ 2020. (181 Nm @ 3000 RPM). This means 1955 Alvis TC 21 will have an easier job in driving up hills or pulling heavy equipment than 2000 Beijing BJ 2020.
Compare all specifications:
| 1955 Alvis TC 21 | 2000 Beijing BJ 2020 | |
| Make | Alvis | Beijing |
| Model | TC 21 | BJ 2020 |
| Year Released | 1955 | 2000 |
| Engine Size | 2993 cc | 2445 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 105 HP | 105 HP |
| Engine RPM | 4000 RPM | 4800 RPM |
| Torque | 221 Nm | 181 Nm |
| Torque RPM | 2500 RPM | 3000 RPM |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1450 kg | 1580 kg |
| Vehicle Length | 4810 mm | 4020 mm |
| Vehicle Width | 1680 mm | 1780 mm |
| Vehicle Height | 1590 mm | 1950 mm |
| Wheelbase Size | 2840 mm | 2310 mm |
