1955 Armstrong Siddeley Sapphire vs. 2010 Alfa Romeo Brera
To start off, 2010 Alfa Romeo Brera is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Armstrong Siddeley Sapphire. In addition, the cost of maintenance, including insurance, on 1955 Armstrong Siddeley Sapphire would be higher. At 2,290 cc (6 cylinders), 1955 Armstrong Siddeley Sapphire is equipped with a bigger engine. In terms of performance, 2010 Alfa Romeo Brera (182 HP @ 6500 RPM) has 64 more horse power than 1955 Armstrong Siddeley Sapphire. (118 HP @ 5000 RPM) In normal driving conditions, 2010 Alfa Romeo Brera should accelerate faster than 1955 Armstrong Siddeley Sapphire. With that said, vehicle weight also plays an important factor in acceleration. 1955 Armstrong Siddeley Sapphire weights approximately 105 kg more than 2010 Alfa Romeo Brera.
Because 1955 Armstrong Siddeley Sapphire is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Armstrong Siddeley Sapphire. However, in wet, icy, snow, or gravel driving conditions, 2010 Alfa Romeo Brera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alfa Romeo Brera (230 Nm @ 4500 RPM) has 41 more torque (in Nm) than 1955 Armstrong Siddeley Sapphire. (189 Nm @ 3500 RPM). This means 2010 Alfa Romeo Brera will have an easier job in driving up hills or pulling heavy equipment than 1955 Armstrong Siddeley Sapphire. 2010 Alfa Romeo Brera has automatic transmission and 1955 Armstrong Siddeley Sapphire has manual transmission. 1955 Armstrong Siddeley Sapphire will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Alfa Romeo Brera will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Armstrong Siddeley Sapphire | 2010 Alfa Romeo Brera | |
Make | Armstrong Siddeley | Alfa Romeo |
Model | Sapphire | Brera |
Year Released | 1955 | 2010 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 2290 cc | 2198 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 118 HP | 182 HP |
Engine RPM | 5000 RPM | 6500 RPM |
Torque | 189 Nm | 230 Nm |
Torque RPM | 3500 RPM | 4500 RPM |
Engine Compression Ratio | 7.5:1 | 11.3:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Top Speed | 155 km/hour | 219 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1650 kg | 1545 kg |
Vehicle Length | 4580 mm | 4420 mm |
Vehicle Width | 1750 mm | 1840 mm |
Vehicle Height | 1570 mm | 1350 mm |
Wheelbase Size | 2900 mm | 2530 mm |
Fuel Tank Capacity | 72 L | 70 L |