1955 Aston Martin DB2 vs. 2002 Lancia Thesis
To start off, 2002 Lancia Thesis is newer by 47 year(s). Which means there will be less support and parts availability for 1955 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1955 Aston Martin DB2 would be higher. At 2,579 cc (6 cylinders), 1955 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 2002 Lancia Thesis (185 HP @ 4100 RPM) has 77 more horse power than 1955 Aston Martin DB2. (108 HP @ 5000 RPM) In normal driving conditions, 2002 Lancia Thesis should accelerate faster than 1955 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2002 Lancia Thesis weights approximately 540 kg more than 1955 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2002 Lancia Thesis, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Lancia Thesis (305 Nm) has 118 more torque (in Nm) than 1955 Aston Martin DB2. (187 Nm). This means 2002 Lancia Thesis will have an easier job in driving up hills or pulling heavy equipment than 1955 Aston Martin DB2. 2002 Lancia Thesis has automatic transmission and 1955 Aston Martin DB2 has manual transmission. 1955 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Lancia Thesis will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1955 Aston Martin DB2 | 2002 Lancia Thesis | |
| Make | Aston Martin | Lancia |
| Model | DB2 | Thesis |
| Year Released | 1955 | 2002 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 2579 cc | 1999 cc |
| Engine Cylinders | 6 cylinders | 5 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 108 HP | 185 HP |
| Engine RPM | 5000 RPM | 4100 RPM |
| Torque | 187 Nm | 305 Nm |
| Engine Bore Size | 78 mm | 82 mm |
| Engine Stroke Size | 90 mm | 75.7 mm |
| Top Speed | 179 km/hour | 233 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1155 kg | 1695 kg |
| Vehicle Length | 4310 mm | 4880 mm |
| Vehicle Height | 1370 mm | 1480 mm |
| Wheelbase Size | 2520 mm | 2600 mm |
