1955 Aston Martin DB2 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1955 Aston Martin DB2 would be higher. At 2,968 cc (6 cylinders), 2008 Mazda 6 is equipped with a bigger engine. In terms of performance, 2008 Mazda 6 (212 HP @ 6000 RPM) has 104 more horse power than 1955 Aston Martin DB2. (108 HP @ 5000 RPM) In normal driving conditions, 2008 Mazda 6 should accelerate faster than 1955 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 6 weights approximately 25 kg more than 1955 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1955 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 6 (267 Nm @ 5000 RPM) has 80 more torque (in Nm) than 1955 Aston Martin DB2. (187 Nm @ 3000 RPM). This means 2008 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1955 Aston Martin DB2. 2008 Mazda 6 has automatic transmission and 1955 Aston Martin DB2 has manual transmission. 1955 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Aston Martin DB2 2008 Mazda 6
Make Aston Martin Mazda
Model DB2 6
Year Released 1955 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2579 cc 2968 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 108 HP 212 HP
Engine RPM 5000 RPM 6000 RPM
Torque 187 Nm 267 Nm
Torque RPM 3000 RPM 5000 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1155 kg 1180 kg
Vehicle Length 4310 mm 4750 mm
Vehicle Width 1640 mm 1790 mm
Vehicle Height 1370 mm 1450 mm
Wheelbase Size 2520 mm 2680 mm
Fuel Tank Capacity 77 L 68 L