1955 Aston Martin DB2 vs. 2010 Chevrolet Impala
To start off, 2010 Chevrolet Impala is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1955 Aston Martin DB2 would be higher. At 3,500 cc (6 cylinders), 2010 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Impala (211 HP @ 5800 RPM) has 103 more horse power than 1955 Aston Martin DB2. (108 HP @ 5000 RPM) In normal driving conditions, 2010 Chevrolet Impala should accelerate faster than 1955 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Impala weights approximately 458 kg more than 1955 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Impala, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Impala (293 Nm @ 4000 RPM) has 106 more torque (in Nm) than 1955 Aston Martin DB2. (187 Nm @ 3000 RPM). This means 2010 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 1955 Aston Martin DB2. 2010 Chevrolet Impala has automatic transmission and 1955 Aston Martin DB2 has manual transmission. 1955 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Impala will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1955 Aston Martin DB2 | 2010 Chevrolet Impala | |
| Make | Aston Martin | Chevrolet |
| Model | DB2 | Impala |
| Year Released | 1955 | 2010 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 2579 cc | 3500 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 108 HP | 211 HP |
| Engine RPM | 5000 RPM | 5800 RPM |
| Torque | 187 Nm | 293 Nm |
| Torque RPM | 3000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Flex Fuel |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1155 kg | 1613 kg |
| Vehicle Length | 4310 mm | 5090 mm |
| Vehicle Width | 1640 mm | 1852 mm |
| Vehicle Height | 1370 mm | 1491 mm |
| Wheelbase Size | 2520 mm | 2807 mm |
| Fuel Tank Capacity | 77 L | 64 L |
