1955 Austin A 30 vs. 2008 Land Rover Defender
To start off, 2008 Land Rover Defender is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Austin A 30. In addition, the cost of maintenance, including insurance, on 1955 Austin A 30 would be higher. At 2,495 cc, 2008 Land Rover Defender is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Land Rover Defender weights approximately 1437 kg more than 1955 Austin A 30.
Because 2008 Land Rover Defender is four wheel drive (4WD), it will have significant more traction and grip than 1955 Austin A 30. In wet, icy, snow, or gravel driving conditions, 2008 Land Rover Defender will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Land Rover Defender (301 Nm @ 1950 RPM) has 247 more torque (in Nm) than 1955 Austin A 30. (54 Nm @ 2200 RPM). This means 2008 Land Rover Defender will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 30.
Compare all specifications:
1955 Austin A 30 | 2008 Land Rover Defender | |
Make | Austin | Land Rover |
Model | A 30 | Defender |
Year Released | 1955 | 2008 |
Engine Position | Front | Front |
Engine Size | 802 cc | 2495 cc |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 28 HP | 0 HP |
Torque | 54 Nm | 301 Nm |
Torque RPM | 2200 RPM | 1950 RPM |
Engine Bore Size | 58 mm | 84.5 mm |
Engine Stroke Size | 76 mm | 89 mm |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 5 doors |
Vehicle Weight | 680 kg | 2117 kg |
Vehicle Length | 3470 mm | 5070 mm |
Vehicle Width | 1410 mm | 1800 mm |
Vehicle Height | 1490 mm | 2040 mm |
Wheelbase Size | 2030 mm | 3230 mm |
Fuel Tank Capacity | 48 L | 93 L |