1955 Austin A 40 vs. 2003 Avanti Studebaker

To start off, 2003 Avanti Studebaker is newer by 48 year(s). Which means there will be less support and parts availability for 1955 Austin A 40. In addition, the cost of maintenance, including insurance, on 1955 Austin A 40 would be higher. At 5,952 cc (8 cylinders), 2003 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2003 Avanti Studebaker (321 HP @ 3300 RPM) has 280 more horse power than 1955 Austin A 40. (41 HP @ 4500 RPM) In normal driving conditions, 2003 Avanti Studebaker should accelerate faster than 1955 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 2003 Avanti Studebaker weights approximately 1645 kg more than 1955 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1955 Austin A 40. In wet, icy, snow, or gravel driving conditions, 2003 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Avanti Studebaker (560 Nm @ 2000 RPM) has 481 more torque (in Nm) than 1955 Austin A 40. (79 Nm @ 2400 RPM). This means 2003 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 40. 2003 Avanti Studebaker has automatic transmission and 1955 Austin A 40 has manual transmission. 1955 Austin A 40 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Avanti Studebaker will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Austin A 40 2003 Avanti Studebaker
Make Austin Avanti
Model A 40 Studebaker
Year Released 1955 2003
Engine Position Front Front
Engine Size 1200 cc 5952 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 41 HP 321 HP
Engine RPM 4500 RPM 3300 RPM
Torque 79 Nm 560 Nm
Torque RPM 2400 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Automatic
Vehicle Weight 1030 kg 2675 kg
Vehicle Length 4130 mm 5490 mm
Vehicle Width 1570 mm 2040 mm
Vehicle Height 1570 mm 2040 mm
Wheelbase Size 2530 mm 3410 mm